Self-contained air breathing apparatus
Time:2013-05-12 14:02:38 | Browse:2495

Code:R1-05

Describe

The pinnacle of self-contained air breathing apparatus, through the improvement of key components, security, ease of use, comfort, scalability, and ease of maintenance aspects in order to bring a higher value in use. The product in accordance with the European EN136, EN137 standard design can be used to rescue and protect the respiratory system from the self-contained breathing equipment. By 30MPa carbon fiber cylinders, valves, pressure for valve mask, backplane components. Widely used in hypoxia, there are unknown or known high concentrations of toxic and harmful gases, immediate threat to human life and health place


Ultra-wide-field mask
• Hermetic, inlet, outlet mutually independent dual-channel breathing mask;
• The mask wide field of vision the mask lens section design vision will not be deformed at any angle;
• Unique mask diversion design to prevent lens fogging (mask has a window in addition to fogging function);
• equipped with a mechanical Talk diaphragm, clear sound transmission, the optional voice amplifier and wireless communication components;
• mask for valve connection for fast card-fit connection, fast, self-locking;
• parts imported from Germany.
Pressure for the valve
• pressure for the valve hemispherical design, even if wearing heavy gloves to operate freely;
• full range of degrees of freedom:
• mask and pressure for valve connection activities (360o rotation)
• for the trachea and the pressure for valve connection activities (360o rotation)
• supply pipe with him to rescue the connector connection activities (360o rotation);
• Point-and-closed, remove the pressure for the valve closing pressure for the valve in the same action is completed;
• pressure for valve mask connected quick snap (fast, self-locking);
• enhanced engineering materials, high-temperature impact resistance;
• imported from Germany.
 
Reduced pressure and the gas supply system
• fast interface with chest pressure, through the installation of three joints, He saved use;
• safety valve, pressure reducer output design to prevent decompression valve failure, the influx of high-pressure air in the pressure system;
• safety valve flanking whistle alarm apparatus in a distance of one meter measured over obtaining sound level as 93dB the alarm whistle duration of more than 15 minutes, and air consumption only 3.5L/min;
• Optional ear nearly alarm whistle, whistle closest to the ear, suitable for noisy environment;
• Optional pre-alarm whistle, fire and other special industry requirements;
• Main components imported from Germany.
 
Brace
• brace and ribbon are flame-retardant material, suitable for fire rescue;
• sturdy and durable materials, applicable to a variety of complex and harsh environment;
• Ergonomic back frame, and meet back wearing comfort;
• webbing buckle are self-locking design to prevent accidental loss;
• Unique shoulder strap reflective strip design, easy to be found in the dark;
• belt buckle open design, anti-unconscious open;
• belt with a supply valve socket fixed to the valve body in the standby state.
 
Near the ear alarm whistle (optional):
• Alarm whistle position rose to the top of the back frame next to the extension from the conventional pressure reducer;
• is the closest to the ear portion (<20cm), the whistle to be identified more easily.
 
Pre-alarm whistle (optional):
• Alarm whistle and pressure gauge integrated in one, located in the chest;
• activated using high-pressure, medium-pressure alarm mode. The alarm duration is four times the alarm mode of the high-voltage driver to reduce alarm gas consumption to extend the use of time;
• meet the special needs of the fire and rescue industry.
He saved the module:
• You can connect up to two breathing hood, rescue function;
• quick-connect interface, quick installation, solid and reliable;
• modular design, freely upgrade.
------Separator----------------------------