Choice of eye protection
Time:2013-01-13 14:25:14 | Source:esen ppe | Author:esen ppe | Browse:7068
Compared with breathing or hearing protection, eye and face protection does not require a rigorous quantitative assessment, more emphasis is selected depending on the type of hazard protective equipment. Eye and face protection in accordance with the following two steps:
Step one: identify eye and face hazards in the workplace types, such as:
Solid blows (from sanding, scraping, grinding, cutting, cutting, planing, stapling, machining operations, the higher the impact brought about by the impact was generated by the mechanical impact generated material than manual)
The spatter of high temperature (from the furnace, molten metal perfusion and mechanical grinding and other operations)
Chemicals (job operation from plating, painting and other chemicals, chemical splash, vapor and stimulation)
Harmful light radiation (from the various types of welding, the processing operation of the molten metal and the use of the ultraviolet light source of the infrared)
Step two: Select the appropriate eye and face protective equipment, such as:
1) solid blows recommended: (safety glasses or protective goggles, full with protective goggles without vents)
2) high temperature spatter recommended: (wire mesh screen, heat-reflective surface screen with protective glasses, heat-reflective surface the screen positive pressure respirator with protective glasses)
3) Recommended use of the chemical: (anti-liquid splash protective goggles, protective goggles without vents, round with a positive pressure respirator with safety goggles)
4) The harmful light radiation source (with protective equipment for welding filters, protective glasses, protective goggles recommended full with positive pressure respirator with safety goggles)
In addition, there are some special use eye and face protective equipment such as: anti-laser, anti-microwave radiation-shielding. Different pattern shape, cup-shaped protective goggles, protective goggles for indirect ventilation and replacement lenses, protective glasses and so on.
Other at the scene, there will the eye facial or facial skin, causing the liquid splashes or dust intrusion station of the eye injury, and the liquid and dust will not produce a chemical reaction with water. Should be equipped with an emergency eyewash device at the scene, rinse the eye face or facial skin for the first time.
Esen PPE engineers will work with you, assess all the risks faced by your workshop. And listen to the other requirements of the first-line operators outside for security, to provide you with the most comprehensive solutions for eye and face protective equipment.
------Separator----------------------------
